Floor Repairing
And Epoxy Floor
Johor Bahru (JB)

Antistatic ESD Flooring Johor Bahru (JB) | Clean Room Flooring

Anti-static epoxy flooring is mostly used in electronic and telecommunication industries, automotive industries, pharmaceutical factories, aerospace industries, operation theatres, computer rooms etc. Electrical components that are sensitive to an ESD include computers, mobile phones, tablets and television equipment; complementary metal-oxide-semiconductor (CMOS) chips found in CPUs and graphic cards; transistor-transistor logic (TTL) chips; metal-oxide-semiconductor field-effect transistors (MOSFET) etc.

ESD floor helps to prevent harmful electrical charge that builds up from destroying sensitive components, by dissipating the charge safely to ground. Also, it serves as the safe control of electrical static charge that accumulates from a person’s movement across the floor. ESD flooring helps to greatly reduce or eliminate the potential of accidental electrostatic discharge, which can damage sensitive electronic components during manufacture and can result in significant damage, injury and financial loss.

ESD standards vary from industry to industry. While our ESD Conductive floor meets the standard including BS2050, ANSI/ESD S2020, ASTM F150 Conductive, IEC 61340-4-1 and IEC 61340-4-5 for electronics manufacturing. Apart from Conductive floor, we also provide dissipative epoxy floor which compiles to ANSI/ESD S7.1 and ASTM F150 Dissipative requirements.

Anti-static flooring can also help in preventing explosions and fires when working with flammable material found in certain gases and liquids, helping to reduce the risk of costly damage to equipment and injury to personnel.
Anti Static ESD Floor   Anti Static ESD Floor   Anti Static ESD Floor   Anti Static ESD Floor
Anti Static ESD Floor   Anti Static ESD Floor        
Dust Free Clean Room
Many manufacturing industries utilize areas which are sensitive to environmental contamination. These low-level pollutants such as airborne microbes, dust and aerosol particles end up on the floor. Clean rooms are found in a variety of facilities that service the semiconductor, vaccine, biotechnology, medical device, nanotechnology and pharmaceutical industries.

These rooms are called “clean rooms”, which are defined as a manufacturing and inspection area that is temperature and humidity controlled and has continuously filtered air specifically designed to reduce particulate contamination. In order to prevent particles to become stuck to the floor, the surface needs to be smooth and joint free. Depending on what types of chemicals and products being used in the rooms, the floor must also be resistant to certain chemicals. Our seamless specialty clean room flooring system and wall coatings assist life science and advance technology facilities in maintaining their classified clean room environmental standards.
Dust Free Clean Room   Dust Free Clean Room   Dust Free Clean Room   Dust Free Clean Room